Copper Plating Welding Wire Production Line
Copper Plating Welding wire production line is in five segments
- Wire drawing pre-treatment production line
- Coarse diameter wire drawing production line
- Fine diameter wire drawing production line,
- Welding wire copper plating production line,
- Welding wire layer winding and reeling production line
Technical parameters of the production line
Production Capacity | 3,000 Tons/Annum |
Maximum speed of coarse diameter drawing | 460 meters/min |
Fine diameter drawing maximum speed | 960 meters/min |
Raw materials diameter | φ5.5 mm |
Diameter of finished product | φ0.8mm, φ1.0mm, φ1.2mm, φ1.6mm |
installed capacity | 180 KVA |
Compressor capacity | 6 m³ |
Cooling water | 4 tons/hr |
workshop area | 1000 m² |
Wire drawing pre-treatment production line – 1 Set
Equipment composition: pay-off, shelling, electrolytic pickling, boron coating, drying and other equipment, temperature, electrical control cabinet
Coarse diameter wire drawing production line – LZ560 – 1 Set
Material diameter φ5.5; finished diameter: φ2.2mm ~ φ5mm Frequency Control, automatic tuning tension, PLC control Capacity: 6 tons
Fine diameter wire drawing production line – LZ400/6 – 2 Set
Entrance diameter φ2.2; finished diameter: φ1.2mm, φ1.6mm Frequency Control, automatic tuning tension, PLC control Capacity: 3x2=6 tons of production classes
LZ400/9 – 1 Set
Material diameter φ2.5; finished: φ0.8mm ~ φ1.0mm Frequency Control, automatic tuning tension, PLC control Production capacity: φ0.8mm wire production, producing 1.25 ton/shift
